Panasonic HDC-SD100 Operating Instructions Manual page 56

Function
Built-in flash
Red eye reduction
Shutter sound
Auto slow shutter
56
VQT1T81
Effect/Setting method
When the button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
Select the menu. (l 24)
[RECORD SETUP] # [FLASH] # [AUTO] or [ON]
≥ This function's default setting is [AUTO].
≥ When the button is pressed halfway, the flash indicator will
appear in the bottom left corner of the screen.
[ON]: ß
[AUTO]:
ßA
[OFF]:
≥ When [AUTO] is set, the ambient brightness is automatically
detected, and the flash will activate only when necessary. (If the
flash is not necessary, the [ßA] indicator will not appear when the
button is pressed halfway.)
∫ To adjust the brightness of the flash
Select the menu. (l 24)
[RECORD SETUP] # [FLASH LEVEL] # desired setting
[ßj]: Less brighter
[ßd0]: Normal
[ßi]: Much brighter
Reduces the phenomena where human eyes become red from
flashes.
Select the menu. (l 24)
[RECORD SETUP] # [RED EYE] # [ON]
You can add a shutter sound when recording still pictures.
Select the menu. (l 24)
[RECORD SETUP] # [SHTR SOUND] # [ON]
≥ This function's default setting is [ON].
You can record bright pictures even in dark places by slowing
the shutter speed.
≥ The intelligent auto mode is set to [OFF]. (l 46)
Select the menu. (l 24)
[ADVANCED] # [AUTO SLOW SHTR] # [ON]
≥ The shutter speed is adjusted between 1/25 and 1/250 depending
on the surrounding brightness. (When adjusting the shutter speed
manually, it can be adjusted between 1/25 and 1/8000.)
≥ If [AUTO SLOW SHTR] is set to [OFF], then the shutter speed will
be set between 1/50 and 1/250. (When adjusting the shutter
speed manually, it can be adjusted between 1/50 and 1/8000.)