Call Options - Panasonic KX-TCD500NZ Operating Instructions Manual

Call Options

To exit the operation, press
1
Press JOYSTICK
(or move).
Call Bar ON/OFF
When this feature is set to ON, outgoing calls cannot be made. Only intercom and calls
assigned as emergency numbers can be made (see Setting the Emergency Calls on
page 44).
Follow steps 1 to 3 shown above, then:
4
Select "Call Bar".
• While the Call Bar mode is turned on, "
Setting the Direct Call Number
After a direct call number has been set and the feature has been turned on, you can dial
only the direct call number by pressing
emergency calls cannot be made. However, incoming calls can be answered.
Follow steps 1 to 3 shown above, then:
4
Select "Direct Call
No.".
7
Select "Save".
• While the direct call mode is turned on, "
at any time.
2
Select "
Setting
Handset".
5
Enter 4-digit Handset
PIN.
(Factory Preset
0000)
" is displayed.
or
5
Enter Direct Call
Number.
(max. 24 digits)
8
Select "On".
" is displayed.
Handset Settings
3
Select "Call
Option".
6
Select "On" or "Off".
. When this feature is ON,
6
Press JOYSTICK.
Go to step 4.
39