Table of Contents
Advertisement
Special instructions
for call options
Selecting area codes to be
deleted automatically
In some situations, phone numbers
stored automatically in the Caller ID list
(page 27) will include area codes. If you
do not want to dial the area codes when
making calls from the Caller ID list, you
can store the area codes which you want
the unit to delete automatically.
Example: You have stored the area
code "09". If you make a call from the
Caller ID list to the phone number "09-
456-7890", the unit dials "456-7890".
" (centre of joystick) i | i
1
#
{^}/{V}: "Call Options" i #
2
{^}/{V}: "Area Code" i #
3
4
Enter an area code (5 digits max.).
i # i {ih}
Note:
L The use of this feature can prevent a
National Call from being dialled. E.g.,
in the case of the South Island, the
"03" will be omitted and will therefore
prevent a National Call to other areas
of the South Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign
up to 6 phone numbers to be restricted,
and select which handsets will be
restricted. Storing area codes here will
prevent the restricted handsets from
dialling any phone number in that area
code.
" (centre of joystick) i | i
1
#
|
Base Unit Settings
{^}/{V}: "Call Options" i #
2
{^}/{V}: "Call Restrict" i
3
#
4
Enter the base unit PIN (default:
"0000").
L If you forget your PIN, consult
your nearest Panasonic service
centre.
5
Set which handsets will be restricted
by pressing the desired handset
number.
L All the registered handset
numbers will be displayed.
L Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L To turn call restriction off for a
handset, press the number again.
The number will stop flashing.
6
#
{^}/{V}: Select a memory location.
7
i #
8
Enter the phone number or area
code to be restricted (8 digits max.).
i # i {ih}
L To erase a restricted number,
press {C/T}.
25
Advertisement
Table of Contents
