Panasonic KX-TCD500NZ Operating Instructions Manual page 61

Problem
No dial tone.
Cannot dial out.
Handset will not ring.
Last number redial does
not work.
No Caller ID number
displayed.
icon flashes.
Cannot register handset to
base.
Before Requesting Help
Possible cause
•
Telephone line not
connected.
•
Call Bar mode ON.
•
Particular dialled number
is restricted.
•
Key lock mode ON.
•
Ringer switched off.
•
Number exceeded 24
digits.
•
Service not supplied.
•
Caller has withheld info.
•
Battery low.
•
Max. number of bases
already registered to
handset.
•
Max. number of handsets
already registered to
base unit.
•
Wrong PIN number
entered (Default 0000).
•
Electrical noise in local
area.
Solution
•
Insert telephone line cord
to network.
•
Turn power OFF then
ON.
•
Turn feature OFF.
•
Remove number from
call restricted list.
•
Turn key lock OFF.
•
Set ringer to one of 6
volume levels.
•
Redial manually.
•
Caller ID service must be
arranged with your
telephone company.
•
Recharge batteries.
•
Delete unused base
registrations from
handset.
•
Delete unused handset
registrations from base.
•
If PIN number is lost,
contact the Panasonic
Service Centre.
•
Move base/handset
away from sources of
electrical noise (e.g. TVs,
radios, etc.).
Page
p.10
p.12
p.39
p.45
p.16
p.36
p.17
p.19
p.10
p.50
p.50
p.46
p.5
61