Other Options - Panasonic KX-TCD500NZ Operating Instructions Manual

Handset Settings
Setting the Direct Call ON/OFF
Follow steps 1 to 3 on the previous page, then:
4
Select "Direct On/Off".
• If the direct call mode is turned off, "
• If you did not set the Direct Call Number and select "On" in step 5, "Enter Phone
No" will be displayed. Enter the number, then press

Other Options

To exit the operation, press
1
Press JOYSTICK
(or move).
Changing the Handset PIN (Personal Identification Number)
The factory preset is 0000.
Once you have programmed the handset PIN, you cannot recall it. We recommend
that you write down the handset PIN. If you forget it, please consult your nearest
Panasonic Service Centre.
Follow steps 1 to 3 shown above, then:
4
Select "Change H/S PIN".
6
Enter new 4-digit Handset PIN.
40
5
Select "On" or "Off".
" will disappear.
at any time.
2
Select "
Setting
Handset".
5
Enter current 4-digit Handset PIN.
7
Enter new 4-digit Handset PIN again
to verify.
twice.
3
Select "Other
Option".
Go to step 4.