Inserting/Removing An Sd Card - Panasonic HDC-TM10 Operating Instructions Manual

Table of Contents

Advertisement

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first time
on this unit, format the SD card. (l 83) When the SD card is formatted, all of the recorded data is deleted.
Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before
proceeding with the formatting. (l 91, 103)
Caution:
When the SD card is removed while the access lamp is lit, this unit may malfunction or the data
recorded on the SD card may be lost.
 
≥ Do not touch the terminals on the back of the SD
card.
≥ Do not apply strong shocks, bend, or drop the SD
card.
≥ Electrical noise, static electricity or the failure of
this unit or the SD card may damage or erase the
data stored on the SD card.
≥ When the card access lamp is lit, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the lamp is on may
result in damage to data/SD card or this unit.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card or
built-in memory, the access lamp lights up.
1
Open the SD card cover by sliding
the OPEN lever B.
≥ While sliding the lever, push up on the SD card
cover to open.
2
Insert/remove the SD card.
≥ Face the terminal side C in the direction shown
in the illustration and press it straight in as far as
it will go.
≥ Press the centre of the SD card and then pull it
straight out.
3
Return the SD card cover to its
original position and press down
to close.
≥ Securely close it until it clicks.
≥ Do not expose the terminals of the SD card to
water, garbage or dust.
≥ Do not place SD cards in the following areas:
j In direct sunlight.
j In very dusty or humid areas.
j Near a heater.
j Locations susceptible to significant difference
in temperature (condensation can occur).
j Where static electricity or electromagnetic
waves occur.
≥ To protect SD cards, return them to their cases
when you are not using them.
VQT2D32
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdc-sd10

Table of Contents