Still Picture Compatibility - Panasonic HDC-TM10 Operating Instructions Manual

∫ Change the thumbnail display
During step 3, the thumbnail display changes in
the following order if the zoom lever is operated
_ `
to side or side.
20 still pictures () 9 still pictures () 1 still
picture
≥ 9 still pictures display returns if the power is
turned off or the mode is changed.
≥ It is possible to operate with the adjust zoom
button.
≥ Switch to 1 still picture display to check the
recording date and file number.
∫ Changing the playback settings
for the slide show
1) Touch .
2) Touch the interval of playback for the slide
show.
[SHORT]:
Approx. 1 sec
[NORMAL]:
Approx. 5 sec
[LONG]:
Approx. 15 sec
72
VQT2D32
3) Touch the desired sound.
≥ During slide show or audio testing, the speaker
volume can be adjusted by the volume lever.
(l 65)
(To test the music audio)
Touch [START] and start the audio testing
≥ Touch the other music option to change the
music to be tested.
≥ When you touch [STOP], the music playback
stops.
4) Touch [ENTER].

Still picture compatibility

≥ This unit is compliant with the unified
standard DCF (Design rule for Camera File
system) established by JEITA (Japan
Electronics and Information Technology
Industries Association).
≥ The file format of still pictures supported by
this unit is JPEG. (Not all JPEG formatted
files will be played back.)
≥ This unit may degrade or not play back still
pictures recorded or created on other
products and other products may degrade
or not play back still pictures recorded on
this unit.
≥ Any still pictures where the thumbnails are
displayed as cannot be played back.