How To Use The Touch Screen - Panasonic HDC-TM10 Operating Instructions Manual

Preparation
5
Setup
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.
∫ Touch
Touch and release the touch screen to select
icon or picture.
≥ Touch the centre of the icon.
≥ Touching the touch screen will not operate while
you are touching another part of the touch screen.
∫ About the Stylus pen
The stylus pen (supplied) can be stored on the
unit as shown when it is not being used. Remove
the stylus pen from the unit when it is to be used.
≥ Only use the supplied stylus pen.
≥ Do not tuck the stylus pen with the LCD monitor.
22
VQT2D32

How to use the touch screen

∫ About the operation icons
These icons are used to switch the menu and
thumbnail display page, for item selection
and setting etc.
Touch to return to the previous screen such
as when setting menus
≥ Wipe the LCD monitor with a soft cloth, such
≥ Do not touch the LCD monitor with hard
≥ Do not touch the LCD monitor with your finger
≥ It may become hard to see or hard to recognise the
≥ Perform the touch screen calibration when the
/ / / :
:
as eye glass cleaner, when it gets dirty with
finger prints and others.
pointed tips, such as ball point pens.
nails, or rub or press with strong force.
touch when the LCD protection sheet is affixed.
touch is not recognised or wrong location is
recognised. (l 32)