Panasonic HDC-TM700PC Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. HDC-TM700PC
  6. Service manual

Panasonic HDC-TM700PC Service Manual

Hide thumbs Also See for HDC-TM700PC:
Table of Contents

Advertisement

Quick Links

High Definition Video Camera
HDC-TM700P
Model No.
HDC-TM700PC
HDC-TM700PU
HDC-TM700EB
HDC-TM700EC
HDC-TM700EE
HDC-TM700EF
HDC-TM700EG
HDC-TM700EP
HDC-TM700GC
HDC-TM700GD
HDC-TM700GK
HDC-TM700GT
HDC-SD700EB
HDC-SD700EC
HDC-SD700EE
HDC-SD700EF
HDC-SD700EG
HDC-SD700EP
HDC-SD700GC
HDC-SD700GN
HDC-SD707EG
Vol. 1
© Panasonic Corporation 2010 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO. VM1002003CE
B27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDC-TM700PC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Panasonic HDC-TM700PC

Summary of Contents for Panasonic HDC-TM700PC

  • Page 1 HDC-TM700P Model No. HDC-TM700PC HDC-TM700PU HDC-TM700EB HDC-TM700EC HDC-TM700EE HDC-TM700EF HDC-TM700EG HDC-TM700EP HDC-TM700GC HDC-TM700GD HDC-TM700GK HDC-TM700GT HDC-SD700EB HDC-SD700EC HDC-SD700EE HDC-SD700EF HDC-SD700EG HDC-SD700EP HDC-SD700GC HDC-SD700GN HDC-SD707EG Vol. 1 © Panasonic Corporation 2010 Unauthorized copy- ing and distribution is a violation of law.

  • Page 2: Table Of Contents

    Colour [ HDC-SD707 ] [ HDC-TM700/SD700 ] (S)...Silver Type (K)...Black Type (K)...Black Type TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.

  • Page 4: How To Discharge The Capacitor On Flash P.c

    1.4. How to Discharge the Capacitor on Flash P.C.B. CAUTION: 1. Be sure to discharge the capacitor on FLASH P.C.B.. 2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 6: Caution For Ac Cord (For Eb

    2.3.2.3. How to Replace the Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 7: How To Replace The Lithium Battery

    It should be disposed of in waste products destined for burial rather than incineration. NOTE: Above caution is applicable for a battery pack which is for HDC-TM700/SD700/SD707 series, as well. 1. Battery Pack for this model. 2. Button-type battery for Remote controller (CR2025: Being supplied from Energy Company, Panasonic Corporation).

  • Page 8: Service Navigation

    3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.

  • Page 9: How To Define The Model Suffix (Ntsc Or Pal Model)

    How to Define the Model Suffix (NTSC or PAL model) There are nine kinds of HDC-TM700/SD700/SD707. • a) HDC-TM700 (Japan domestic model) • b) HDC-TM700P • c) HDC-TM700PC • d) HDC-TM700EB/EC/EF/EG/EP, SD700EB/EC/EF/EG/EP/GN, SD707EG • e) HDC-TM700EE, SD700EE • f) HDC-TM700GT •...

  • Page 10: Formatting

    3.5. Formatting...

  • Page 11: Specifications

    4 Specifications...

  • Page 14: Location Of Controls And Components

    Battery release lever [BATT] Battery holder 10 DC input terminal [DC IN] Always use the supplied AC adaptor or a genuine Panasonic AC adaptor. 11 HDMI mini connector [HDMI] 12 USB terminal [ 13 AV multi connector Use the AV multi cable (only the supplied cable).
  • Page 15 31 Tripod receptacle 32 Shoe adaptor mount 33 Shoe adaptor cover 34 Shoe adaptor release lever [SHOE ADAPTOR RELEASE] 35 Photoshot button [ 36 Zoom lever [W/T] (In Motion Picture Recording Mode or Still Picture Recording Mode) Thumbnail display switch [ Volume lever [ VOL ] (In Playback Mode) 37 Status indicator...

  • Page 16: Selecting A Mode

    Selecting a mode Change the mode to recording or playback. Operate the mode dial to change the mode to Align with the status indicator Motion Picture Recording Mode Still Picture Recording Mode Playback Mode How to use the touch Using with the remote screen control You can operate by directly touching the...

  • Page 17: Service Mode

    6 Service Mode 1. Indication method of the service menu Set the mode dial “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

  • Page 18: Built-In Memory Self Check Execution (Hdc-Tm700 Only)

    6.1. Built-in Memory Self Check Execution (HDC-TM700 only) Touch the [ 3 ] of LCD, select Built-in memory self check execution. Operation specifications Indication contents • Built-in memory self check result display Display the Built-in memory self check execution. Displays other than “OK” are abnormalities of Built-in memory. Push the “Menu”...

  • Page 19: Power On Self Check Result Display

    6.3. Power ON Self Check Result Display Touch the [ 5 ] of LCD, select Power ON self check result display. Operation specifications Indication contents • Power ON self check result display Function to diagnose correct function of the device and interface between devices result display. Display the following commnucation test result.

  • Page 20: Service Fixture & Tools

    7 Service Fixture & Tools 7.1. When Replacing the Main P.C.B. After replacing the MAIN P.C.B., be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system”, together with Maintenance software. 7.2.
  • Page 21 CAUTION-1. (When servicing FLASH P.C.B.) 1. Be sure to discharge the capacitor on FLASH P.C.B.. Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.”. The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2.

  • Page 22: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This is a disassembling chart. When assembling, perform this chart conversely. 8.2. PCB Location...

  • Page 23: Disassembly Procedure

    8.3. Disassembly Procedure Item Removal Side (R) OP P.C.B. Fig.D15 2 Screws (T) Item Removal Unit SP Angle Side Case (L) Unit Fig.D1 2 Screws (A) Speaker PS6501 (Connector) 4 Screws (B) P6501 (Connector) 2 Locking tabs Speaker Sensor Cover Unit Side (R) OP P.C.B.
  • Page 24 Item Removal MIC AMP P.C.B. Unit Fig.D33 FP4801 (Flex) FP4804 (Flex) 2 Hooks MIC AMP P.C.B. Unit Camera Operation Unit Fig.D34 2 Locking tabs Camera Operation Unit ECM FPC Unit Fig.D35 4 Locking tabs MIC Sheet MIC Unit Fig.D36 MIC Cushion (A) MIC Cushion (B) MIC Cushion (C) MIC Case...
  • Page 25 8.3.2. Removal of the ESD P.C.B. Unit Fig.D3 Fig.D2...
  • Page 26 8.3.3. Removal of the Cover Board Unit 8.3.4. Removal of the Top Case Unit Fig.D4 Fig.D5...
  • Page 27 8.3.5. Removal of the Front Unit Fig.D6 Fig.D7...
  • Page 28 8.3.6. Removal of the Side Case (R) Unit 8.3.7. Removal of the Batt Case Unit Fig.D9 8.3.8. Removal of the Lens Unit Fig.D8 Fig.D10...
  • Page 29 Fig.D13 8.3.10. Removal of the Flash P.C.B. Unit Fig.D11 8.3.9. Removal of the Main P.C.B. Unit Fig.D14 Fig.D12...
  • Page 30 8.3.11. Removal of the Side (R) OP P.C.B. Unit and Speaker Fig.D16 8.3.12. Removal of the Fan Motor Fig.D15 Fig.D17...
  • Page 31 8.3.13. Removal of the LCD Case Unit 8.3.14. Removal of the Monitor P.C.B. Unit Fig.D19 Fig.D18...
  • Page 32 Fig.D20 Fig.D21...
  • Page 33 8.3.15. Removal of the Front P.C.B. Unit Fig.D24 8.3.17. Removal of the Front Case Fig.D22 8.3.16. Removal of the Barrier Motor Unit Fig.D23 Fig.D25...
  • Page 34 8.3.18. Removal of the MF SENS P.C.B. Unit, Front Case Unit, MF Front Frame and MF Sheet Fig.D26 Fig.D27...
  • Page 35 8.3.19. Removal of the EVF Unit Fig.D29 8.3.20. Removal of the Top Frame Fig.D28 Fig.D30...
  • Page 36 8.3.22. Removal of the MIC AMP P.C.B. Unit Fig.D31 8.3.21. Removal of the Top Operation Unit Fig.D33 8.3.23. Removal of the Camera Operation Unit Fig.D34 Fig.D32...
  • Page 37 8.3.24. Removal of the ECM FPC Unit Fig.D36 8.3.25. Removal of the Batt Catcher P.C.B. Unit Fig.D35 Fig.D37...
  • Page 38 8.3.26. Removal of the MOS Heat Radiation 8.3.28. Removal of the IRIS Unit Plate Fig.D38 8.3.27. Removal of the Prism Unit and Optical Filter Fig.D40 Fig.D39...
  • Page 39 8.3.29. Removal of the Zoom Motor 8.3.30. Removal of the 1st Lens Frame Unit Fig.D42 8.3.31. Removal of the 2nd Lens Frame Move Unit Fig.D43 Fig.D41...
  • Page 40 8.3.32. Removal of the Body Unit and the 8.3.33. Removal of the Master Flange Zoom Guide Pole Cover Fig.D45 8.3.34. Removal of the 4th Lens Frame Move Unit Fig.D44 Fig.D46...
  • Page 41 8.3.35. Removal of the Focus Guide Pole L and Focus Guide Pole S Fig.D48 Fig.D47...

  • Page 42: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Electric Adjustment • Adjustment method is different from a conventional High definition video camera. • An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
  • Page 43 Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System".

  • Page 44: Factory Setting

    10 Factory Setting 10.1. How To Turn On The Factory Settings? 1. Set the mode dial “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

  • Page 45: What Is The Factory Settings

    10.2. What Is The Factory Settings? The factory settings clean up and/or refresh the following settings. 1. MENU, MODE, ADJUSTMENT VALUE. 2. SD card format. 3. Reset the folder number and file number of still pictures. (Setting the folder number is 100, and file number is 0.) 4.
  • Page 46 Model No. HDC-TM700P HDC-TM700EP HDC-SD700EF 4.Although the voltage and waveform available on here is measured with standard frame, it may be differ from actual measurement due to modification of circuit and so on. HDC-TM700PC HDC-TM700GC HDC-SD700EG HDC-TM700PU HDC-TM700GD HDC-SD700EP 5.The voltage being indicated here may be include observational-error (deviation) due to...

  • Page 47: S2. Voltage Chart

    S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.

  • Page 48: S3. Block Diagram

    S3. Block Diagram S3.1. Overall Block Diagram : VIDEO SIGNAL NOTE : AUDIO SIGNAL : CLK or CONTROL LINE LENS(F1.5-2.8 12x) ZOOM/ IC151 FOCUS IRIS/ MOS IMAGE MOTOR/ SENSOR x 3 IC851 COLOR EVF EVF COLOR PANEL DRIVER Analog COLOR LCD PANEL X301 (42.725275MHz)

  • Page 49: S4. Schematic Diagram

    S4. Schematic Diagram S4.1. Interconnection Diagram MIC AMP P.C.B. FLASH (COMPONENT SIDE) : (FOIL SIDE) FP6501 POWER SW E KEYIN3 FP4803 D GND SIDE-R OP FPC D GND FUN FG PW FAN5V SPOUT2 FLASH P.C.B. SPOUT1 FP4804 OPERATION SW VTR KEY 5 MNL SW PS6501 VTR KEY 5...

  • Page 50: S4.2. Strobe Schematic Diagram

    S4.2. Strobe Schematic Diagram [AV JACK] JK3301 G_VOUT2 K2HZ112E0001 G_VOUT_JK LB3304 J0JCC0000276 R3315 75[D][18] G_VOUT VOUT G_HDYOUT_JK LB3303 J0JCC0000408 R3314 75[D][18] G_HDYOUT HDYOUT G_HDYOUT2 VGND L3351 HDYGND G_LOUT_JK J0JCC0000276 LB3305 G_LOUT LOUT LB3302 J0JCC0000408 PW_3R2V_GS G_PBOUT_JK R3313 75[D][18] G_PBOUT PBOUT G_PBOUT2 LRGND C3352...

  • Page 51: S4.3. Front Schematic Diagram

    S4.3. Front Schematic Diagram [HEADPHONE] HPCOM IR6401 D_GND B3RBB0000013 LB4927 HP_DET_L REMOCON J0JCC0000276 HP_DET_L LB4928 J0JCC0000276 G_HPL ROUT C4921 LB4929 0.01 J0JCC0000276 G_HPR G_EXTMICL ROUT C4922 LB4930 Q4908 G_EXTMICR HPCOM PD_A 0.01 J0JHC0000078 B1ABDF000017 EXTMIC_L PD_C C4923 C6401 VA4902 R4922 10u[28] R4906 R4913...

  • Page 52: S4.4. Evf B/L Schematic Diagram

    S4.4. EVF B/L Schematic Diagram TO EVF PANEL C803 TO BATT_CATCHER FP802 10V1[18] [0.3mm] K1MY20BA0370 FP801 [0.5mm][SHITA] K1MN21AA0094 D_GND D_GND VSSG D_GND D_GND HCK2 PW_LCD8R5V HCK1 PW_LCD8R5V PW_LCD8R5V CLK2_EVFCKH2 CKH2 CLK2_EVFCKH1 CKH1 PW_EVFBL5V XSTB PW_EVFBL5V PW_EVF3V PW_EVF3V CKV1 BLUE G_BOUT B_OUT GREEN G_ROUT...

  • Page 53: S4.5. Mic Amp Schematic Diagram

    S4.5. MIC AMP Schematic Diagram Q4801 B1ABDF000017 R4816 R4817 4700 TO MAIN FP4802 K1MN21AA0035 C4817 IC4801 F3F0J226A032 C0ABBB000369 PW_LIBATT FP4801 TO ECM PW_LIBATT K1MY08BA0370 VTR_KEY_5 VTR_KEY_4 VTR_KEY_1 R4807 PHOTO_SW C4801 R4806 ECM[R] 0.047 MIC_GND C4802 MIC_GND ECM[C] C4803 R4808 ECM[F] G_MIC_OUT_L 0.047 ECM[L]...

  • Page 54: S4.6. Mf Sens Schematic Diagram

    S4.6. MF SENS Schematic Diagram TO FRONT FP6701 K1MY06BA0370 MF SENSOR MFVCC MFL1 Q6701 MFL2 B3NBA0000017 SE_GND SE_GND Q6702 B3NBA0000017 HDC-TM700/SD700/SD707 MF SENS Schematic Diagram...

  • Page 55: S4.7. Batt_Catcher Schematic Diagram

    S4.7. BATT_Catcher Schematic Diagram TO SIDE_R_OP CL6304 FP6302 K1MY08BA0370 POWER_SW POWER_SW KEYIN3 KEYIN3 D_GND D_GND FAN_FG FAN_FG PW_FAN5V IC6302 PW_FAN5V C0DBGFC00009 TO MAIN C6301 PP601 K1KB50AA0094 GYRO SENSOR 検出軸と実装方向は最終確認すること CL6305 BATT- BATT- BATT+ CL6306 L6305 BATT+ 17 16 $[G1C100MA0410] C6309 BATT+ 1000P BATT+...

  • Page 56: S4.8. Monitor Schematic Diagram

    S4.8. Monitor Schematic Diagram TO MAIN TO LCD PANEL FP901 FP904 K1MY16BA0159 K1MY41BA0369 [0.5mm][SHITA] [0.3mm][SHITA][t=0.2mm] CLK18_LCD VGL2 CLK18_LCD PW_REG1R8V PW_REG1R8V PW_REG3V BUS9_LCDYC0 BUS9_LCDYC0 VCC1 BUS9_LCDYC1 C902 C905 BUS9_LCDYC1 $[18] C906 6.3V 10V1[18] BUS9_LCDYC2 BUS9_LCDYC2 VCOMH C903 C907 BUS9_LCDYC3 BUS9_LCDYC3 VCOML 6.3V BUS9_LCDYC4 IOVCC...

  • Page 57: S4.9. Mic Amp Fpc Schematic Diagram

    S4.9. MIC AMP FPC Schematic Diagram TO MIC TO MAIN (FP4802) (PS6002) FT6501 PP6003 K1KA20A00275 [0.3mm][UE] [0.5mm][BtoB] ZOOMAD PW_LIBATT AVREF PW_LIBATT DISK_ACCESS_LED VTR_KEY_5 STANDBY_LED VTR_KEY_4 POWER_LED VTR_KEY_1 PW_LIBATT PHOTO_SW L=0.2 VTR_KEY_5 VTR_KEY_4 MIC_GND L=2.6 VTR_KEY_1 MIC_GND PHOTO_SW G_MIC_OUT_L G_MIC_OUT_F S=1.4 MIC_GND G_MIC_OUT_C MIC_GND...

  • Page 58: S4.10. Cam Func Fpc Schematic Diagram

    S4.10. CAM FUNC FPC Schematic Diagram / S4.11. Side R Schematic Diagram TO SPEAKER P6501 K1KA02BA0014 SPOUT2 SPOUT1 S6601 TO MIC_AMP_PCB FP4804 K1MY04BA0370 TO BATT_CATCHER K0F111A00589 FT6501 FP6501 [0.5mm] K1MN08A00072 TO FAN VTR_KEY_5 VTR_KEY_5 SPOUT1 PS6501 CAMERA FUNCTION K1KA03BA0014 SPOUT2 PW_FAN5V PW_FAN5V FAN_FG...

  • Page 59: S5. Print Circuit Board

    S5. Print Circuit Board S5.1. Strobe P.C.B. S5.1.1. Strobe P.C.B. (Component Side) 8 7 6 5 C7005 Q7005 C7010 P7002 RL7002 R7015 C3910 CH7001 CH7002 CH7003 C3902 C3905 C3901 C3904 C3915 R3914 R3913 RX3901 RL7001 TL7002 C3352 CH3351 9 8 7 6 IC3351 (Component Side) HDC-TM700/SD700/SD707...

  • Page 60: S5.1.2. Strobe P.c.b. (Foil Side

    S5.1.2. Strobe P.C.B. (Foil Side) R7007 D7002 P7001 C7001 R7001 D7003 HS3901 C3906 C3302 C3303 JK3301 (Foil Side) HDC-TM700/SD700/SD707 Strobe P.C.B. (Foil Side) S-15...

  • Page 61: S5.2. Front P.c.b

    S5.2. Front P.C.B. C6401 R4920 VA6402 CL6408 CL6409 (Component Side) C4901 LB4926 C4908 Q4904 RL4811 C4913 R4908 R4911 C4923 R4909 C6402 Q4907 R6402 R4924 Q4908 Q4901 R6403 R6416 R4907 LB4927 Q4902 Q6401 LB4930 R4906 (Foil Side) HDC-TM700/SD700/SD707 Front P.C.B. S-16...

  • Page 62: S5.3. Evf B/L P.c.b

    S5.3. EVF B/L P.C.B. / S5.4. MIC AMP P.C.B. D801 R4810 R4805 C4812 D803 C4811 R803 Q4801 ZB6401 RL4801 C4815 R4818 C4816 C4803 (Component Side) (Component Side) C 4 8 0 6 R 4 8 1 1 FP4803 R 4 8 0 6 R 4 8 1 5 (Foil Side) (Foil Side)

  • Page 63: S5.5. Mf Sens P.c.b

    S5.5. MF SENS P.C.B. / S5.6. BATT_Catcher P.C.B. CH853 MK3 MK2 C6308 C6307 Q6701 C854 Q6702 C858 (Component Side) PP601 MK1 MK4 (Component Side) V A 6 7 0 2 R 6 7 0 4 R 6 7 0 1 R 6 7 0 2 R 6 7 0 3 V A 6 7 0 1...

  • Page 64: S5.7. Monitor P.c.b

    S5.7. Monitor P.C.B. S5.7.1. Monitor P.C.B. (Component Side) (Component Side) HDC-TM700/SD700/SD707 Monitor P.C.B. (Component Side) S-19...

  • Page 65: S5.7.2. Monitor P.c.b. (Foil Side

    S5.7.2. Monitor P.C.B. (Foil Side) C905 C907 CH904 C908 CH905 C909 CH906 C915 C916 CH907 C911 C917 C913 C504 CH901 C505 CH903 CH902 (Foil Side) HDC-TM700/SD700/SD707 Monitor P.C.B. (Foil Side) S-20...

  • Page 66: S5.8. Mic Amp Fpc P.c.b

    S5.8. MIC AMP FPC P.C.B. / S5.9. CAM FUNC FPC P.C.B. FT6501 FT6501 (Foil Side) PP6003 (Foil Side) HDC-TM700/SD700/SD707 HDC-TM700/SD700/SD707 MIC AMP FPC P.C.B. CAM FUNC FPC P.C.B. S-21...

  • Page 67: S5.10. Side R P.c.b

    S5.10. Side R P.C.B. (Component Side) P S 6 5 0 1 (Foil Side) HDC-TM700/SD700/SD707 Side R P.C.B. S-22...

  • Page 68: S6. Replacement Parts List

    S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
  • Page 69 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R3905 ERJ2GEJ220 M.RESISTOR CH 1/16W 22 VEP03H98CP MAIN PCB UNIT 1 TM700EG,EP,EF,EB,EC R3906 D0YAR0000007 M.RESISTOR CH 1/10W (RTL) E.S.D. R3907 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K VEP03H98CQ MAIN PCB UNIT 1 TM700EE,GC,GK (RTL) E.S.D.
  • Page 70 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R4907 ERJ6GEYJ154V M.RESISTOR CH 1/8W 150K R4908 D0HB563ZA002 RESISTOR FP4801 K1MY08BA0370 CONNECTOR R4908 ERJ6GEYJ563 M.RESISTOR CH 1/8W 56K FP4802 K1MN21AA0035 CONNECTOR R4909 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K FP4803...
  • Page 71 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks IC851 C1AB00002388 IC 1 E.S.D. VEP06G50A SIDE R OP PCB UNIT (RTL) E.S.D. IC6301 EWTS9CVE11 1 E.S.D. IC6302 C0DBGFC00009 IC 1 E.S.D. FP6501 K1MN08A00072 CONNECTOR JK6751...
  • Page 72 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP03H89D ESD PCB UNIT 1 (TM700) (RTL) E.S.D. VWJ2172 ESD FPC 1 (TM700) VYK3Q67 FRONT CASE UNIT 1 (-K) VYK3Q68 FRONT CASE UNIT 1 (-S) VYK3Q71 BARIA CASE UNIT...
  • Page 73 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP03H98CN MAIN PCB UNIT 1 TM700P,PC,PU,GD (RTL) E.S.D. VEP03H98CP MAIN PCB UNIT 1 TM700EG,EP,EF,EB,EC (RTL) E.S.D. VEP03H98CQ MAIN PCB UNIT 1 TM700EE,GC,GK (RTL) E.S.D. VEP03H98DP MAIN PCB UNIT 1 SD700EG,EP,EF,EB,EC,...
  • Page 74 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VGQ0K38 EYE CUP VGQ0D06 EVF LENS CASE VDL2175 EVF LENS (A) VGQ0C99 LENS HOLDER (A) VDL2176 EVF LENS (B) VGQ0D00 LENS HOLDER (B) VGQ0K39 EVF CASE VGU0E13...
  • Page 75 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VYK3Q65 LCD CASE (T) UNIT 1 (TM700) VYK3Q62 LCD CASE (T) UNIT 1 (SD700) VYK3Z14 LCD CASE (T) UNIT 1 SD707EGK VYK3Z16 LCD CASE (T) UNIT 1 SD707EGS VYK3U03...
  • Page 76 HDC-TM700 vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VXQ1862 PRISM UNIT VXW1115 LENS UNIT L6HA88NC0006 STEPPING MOTORS VXP3372 IRIS UNIT VMA0X14 SIDE YORK VMA0X14 SIDE YORK VMS8060 ZOOM GUIDE POLE VMS8060 ZOOM GUIDE POLE VMS8061...
  • Page 77 HDC-TM700 vol.1 Ref.No. Part No. Part Name & DescriptionPcs Remarks Ref.No. Part No. Part Name & DescriptionPcs Remarks K2GJYDC00004 DC CABLE K1HY12YY0004 MULTI D/RCA CABLE K1HY04YY0032 USB CABLE N2QAEC000024 REMOTE CONTROL UNIT  306 DE-A51CB POWER CHARGERS 1 TM700EG,EP,EF,EB,EC,EE, PU,GC,GT,GD, SD700EG,EP, EF,EB,EC,EE,GC,GN, SD707EG ...

  • Page 78: S7. Exploded View

    S7. Exploded View S7.1. Frame and Casing Section (1) B35 B36 B30 B31 S-33...

  • Page 79: S7.2. Frame And Casing Section (2

    S7.2. Frame and Casing Section (2) S-34...

  • Page 80: S7.3. Evf Section

    S7.3. EVF Section S-35...

  • Page 81: S7.4. Lcd Section

    S7.4. LCD Section S-36...

  • Page 82: S7.5. Camera Lens Section

    S7.5. Camera Lens Section B202 B203 B201 B206 B207 B214 B205 B208 B204 B215 B212 B213 B209 B210 B211 S-37...

  • Page 83: S7.6. Packing Parts And Accessories Section

    S7.6. Packing Parts and Accessories Section (HDC-TM700EB/GC (HDC-SD700GN) HDC-SD700EB/GC) (HDC-TM700EG/EP/EF/EC/EE/GC/GD HDC-SD700EG/EP/EF/EC/EE/GC HDC-SD707EG) (HDC-TM700P/PC/PU/GT/GK) S-38...

This manual is also suitable for:

Hdc-tm700puHdc-tm700pHdc-tm700efHdc-tm700eeHdc-tm700egHdc-tm700gc ... Show all

Table of Contents