Installing The Door Handle - GE 16 Owner's Manual And Installation Instructions

2

INSTALLING THE DOOR HANDLE

1 INSTALL FASTENER
Install the handle fastener into the hole on the freezer
and fresh food doors. The fasteners correspond with the
handle side (the side opposite the hinge).
2 STAINLESS STEEL HANDLE
1. Attach handle to freezer door with screws at the
bottom of the handle. Use the included 1/8" allen
wrench to tighten the set screw at the top of the
position.
2. Attach handle to fresh food door with screws at
the top of the handle. Use the included 1/8" allen
wrench to tighten the set screw at the bottom of
position.
NOTE: Be sure to
handle installation,
if applicable
Installation Instructions
Handle Fastener
2A PLASTIC HANDLE
1. Attach handle to freezer door by sliding handle up
onto fastener and with screws at the bottom of the
handle.
2. Attach handle to fresh food door by sliding handle
down onto fastener and with screws at top of
handle.
before handle installation, if
applicable)
3 BADGE AND PLUG BUTTON
INSTALLATION
1. Place a plug button on the opposite side of the fresh
food door across from the handle.
2. Remove the backing on the GE badge and carefully
place it in the hole opposite the handle on the
freezer door. Be sure the badge is oriented the
correct way before applying it to the door.
12
Badge
Plug
button