Grandview Portable X-Press Series Installation Manual

Download this manual

Enlarged version

GRANDVIEW REPRODUCING GENUINE COLORS

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777

Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 51 1400 Federal Ind. Zone No. 363, Y ushan West Road,

Shiqiao, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

GRANDVIEW REPRODUCING GENUINE COLORS

Model: CB-UXxx

ISO9001:2000

International Certification

Before use, please read instructions carefully. After installation, store instructions for future reference.

Installation Guide for

Portable Series X-Press

Thank you for purchasing a Grandview projection screen.

Screen

Need help?

Do you have a question about the Portable X-Press Series and is the answer not in the manual?

Page 1 Tel: 1-604-412-9777 Fax: 1-604-412-9796 Website: www.grandviewscreen.ca Guangzhou Grandview Crystal Screen Co., Ltd. Thank you for purchasing a Grandview projection screen. P.O. 51 1400 Federal Ind. Zone No. 363, Y ushan West Road, ISO9001:2000 Shiqiao, Panyu District, Guangzhou, Guangdong, China International Certification Before use, please read instructions carefully.
Page 2 Description Warning 1. Don't expose the screen in wind. Illustration 2. For the flatness of the fabric, remember: a) Don't touch the screen surface with hands. b) Don't write or draw on the screen surface. Don't poke screen fabric with finger or edge tools. d) Clean the fabric with soft cloth and lukewarm water.
Page 3: Specifications
Specifications Open Screen Viewing area 1. Put the screen on the ground, in a proper position facing the projector. Turn the feet out until they are Specification Screen dimension Net weight Format Model B1 (mm) (In) (kg) W (mm) H (mm) L (mm) A (mm) perpendicular to the screen casing...
Page 4 Retract screen 4. Pull up the screen with constant speed and stop at desired position for three minutes so that the screen 1. Grasp the handle and retract the screen into the casing till the handle base is firmly fastened in the tube lock can be installed ( Figure 7 - 10 ) ( Figure 13 - 15 )