Shimano STEPS E8000 Series User Manual page 48

RD protection reset
In order to protect the system from falls etc., if the bicycle is subjected to a strong impact, the RD Protection function
will operate and the connection between the motor and the link will be momentarily severed so that the rear derailleur
can no longer operate. Executing RD Protection Reset restores the connection between the motor and the link, as well as
the function of the rear derailleur.
1.
Press X1 or Y1 to select [OK].
SW-E8000-L/SC-E8000
Y1 X1
Configurable items
OK
Cancel
2.
Press A to confirm [OK], recover the connection
between the motor and the link by rotating the
crank.
SW-E8000-L/SC-E8000
A
Exit
Closes the menu list screen and returns to the basic screen.
1.
Press X1 or Y1 to select [Exit] on the menu list screen.
2.
Press A to confirm. After confirmation, the screen will return to the basic screen.
SW-E6000/SC-E6010
X1
Y1
Details
RD Protection Reset will
operate
To not execute RD
Protection Reset, select
[Cancel]
SW-E6000/SC-E6010
A
46