GE GHDS830EDWS Technical Service Manual page 43

Electric Dryer Heater Resistance
Disconnect power from the dryer. Check from the J7 to the J2 connector on the board. Set your meter to
resistance setting.
Check resistance between the BLUE wire on J2 and the WHITE wire on the J7 connector. Should read
approximately 41.9 OHM.
Note 1: This wire marked as (Y) yellow might be (W) white in some units.
POWER BOARD
K1 K3
K4
K2
1
J7 J6 J5 J4
– 43 –
J2
N-14
(21.18-19.95
Y-14
SEE NOTE 1
(21.18-19.95
(Continued Next Page)
)
)