System Config - Panasonic BT-LH1700WE Operating Instructions Manual

Main Menu
(continued)
g WB adjustment mode
You can adjust "WHITE BALANCE VAR1" – "WHITE BALANCE VAR3" (WB) by selecting "VAR1" – "VAR3" in
"COLOR TEMP." in the "VIDEO CONFIG" menu.
Sub menu Settings
COLOR TEMP.
<USER0–63>
<D93>
<D65>
<D56>
WB-HIGH RED
<0–60>
(Factory preset settings: 30)
WB-HIGH GREEN
WB-HIGH BLUE
WB-LOW RED
WB-LOW GREEN
WB-LOW BLUE
RESET
*1 When adjusting, the item display moves to the lower part of the screen.

SYSTEM CONFIG

Sub menu Settings
BACKLIGHT
< 0–60 >
FUNCTION1
<HV DELAY>
<AUTOSETUP>
<BLUE ONLY>
<GAMMA
SELECT>
<SD ASPECT>
<SCAN>
<SUB
WINDOW>
<UNDEF>
FUNCTION2
<HV DELAY>
<AUTOSETUP>
<BLUE ONLY>
<GAMMA
SELECT>
<SD ASPECT>
<SCAN>
<SUB
WINDOW>
<UNDEF>
*2 This function is disabled while in 2 screen display mode.
*3 These functions are disabled when the control settings are in GPI mode.
*4 If these settings are changed, the menu settings will also change.
*5 When "RGB-COMP." is not selected in "YP
displayed, and this does not operate.
*6 This function will not work when "RGB-COMP." is selected in "YP
The underlined values are factory preset setting values.
Explanation
Used to select the color temperature that will become the
basis for adjustments.
<USER0–63>
<D93> Color temperature around 9300K
<D65> Color temperature around 6500K
<D56> Color temperature around 5600K
Used to adjust the WB in the HIGH level R component.
Used to adjust the WB in the HIGH level G component.
Used to adjust the WB in the HIGH level B component.
Used to adjust the WB in the LOW level R component.
Used to adjust the WB in the LOW level G component.
Used to adjust the WB in the LOW level B component.
This returns the "WB-HIGH RED" – "WB-LOW BLUE"
settings to the factory presets.
The underlined values are factory preset setting values.
Explanation
Used to adjust the brightness of the liquid crystal backlight.
Used to select the functions assigned to [FUNCTION1] and
[FUNCTION2] (front buttons).
*2
<HV DELAY>
Displays the synchronizing signal (horizontal, vertical).
The display is switched in the following order.
OFF H-Delay V-Delay
*5
<AUTOSETUP>
Used to automatically adjust the PC display.
<BLUE ONLY>
Used to cut the red and green signals. You can check the hue (PHASE)
and depth of color (CHROMA). This is switched between ON/OFF by
pushing the button.
<GAMMA SELECT>
You can switch between "NORMAL" and "FILM".
<SD ASPECT>
Used to switch between "16:9" and "4:3".
<SCAN>
You can switch between "UNDER" and "NORMAL".
<SUB WINDOW>
You can perform the settings for 2 screen display mode.
<UNDEF>
No settings
P /RGB" in the "INPUT SELECT" menu, "NOT RGB-COMP.CH-" is
B R
Adjustable settings 0–63 (color
temperature around 3000K–9300K)
HV-Delay OFF
*3*4
*3*4
P /RGB" in the "INPUT SELECT" menu.
B R
*1
*1
*1
*1
*1
*1
*3*4
*3*4*6
E-16