System Config; Gpi; Input Select - Panasonic BT-L1500PJ Operating Instructions Manual

Main Menu
(continued)

SYSTEM CONFIG

Sub menu Setting
CONT./BACK. BACKLIGHT
CONTRAST
BACKLIGHT 0 to 60
CONTINUE
STATUS DISPLAY
3SEC OFF
OFF
FACTORY
SETUP LOAD
COLOR SPACE SMPTE-C
EBU
ITU-709
OFF
POWER DOWN
ON
1
*
Factory default setting for the BT-L2150P/1500P.
2
*
Factory default setting for the BT-L2150E/1500E.
3
*
ITU-709 is an ITU-R BT.709 standard.

GPI

Enables and disables all GPI functions enabled by GPI CONTROL.
Sub menu Setting
GPI CONTROL
DISABLE
ENABLE

INPUT SELECT

Sub menu Setting
NTSC SETUP
75
00
PC
Description
Selects function to be assigned to the CONT./B.LIGHT front panel
buttons.
<BACKLIGHT> Adjusts the B.LIGHT (backlight).
<CONTRAST> Adjusts the CONT. (contrast).
Adjusts LCD backlight brightness. Adjust as required by ambient
conditions.
Sets display state for input signal status (on-screen menu).
<CONTINUE> Displayed at all times.
<3SEC OFF> Displayed for approximately 3 seconds after a status
<OFF >
Loads saved factory defaults (FACTORY).
1
*
Sets the studio standard color shade.
2
*
3
*
Selects whether monitor power shuts off (POWER DOWN) when no
operation has taken place for a preset period of time and no input signal
is present.
<OFF> Disables POWER DOWN.
<ON> Enables POWER DOWN.
Description
Enables and disables GPI functions
<DISABLE> Disabled
<ENABLE>
Description
Selects NTSC setup level.
<75> Select this function when using 7.5 % setup signals.
<00> Select this when there is no setup signal.
Performs analog PC settings.(PC
Underlined values indicate factory defaults.
change.
Not displayed.
Underlined values indicate factory defaults.
Enabled
Underlined values indicate factory defaults.
(Adjusts the interior of the monitor to the 7.5 % setup level to
suit the black level)
page 22)
21