Front Axle Hub - Daihatsu F300 Service Manual

Hide thumbs Also See for F300:

Table of Contents

ASSEMBLY OF FRONT AXLE HUB

I. Drive the hub bolt into the front axle hub by means of a

plastic hammer.

Be sure to align the cut-out section of the hub bolt with

2. Install the brake disc to the front axle hub. Evenly tighten

the attaching bolts to the specified torque over two or three

Tightening Torque:

53.9- 73.5 N-m

(5.5- 7.5 kgf-m, 39.8- 54.2 ft-lb)

3. Install the outer race (inner side) of the tapered roller bear-

ing, using the following SST.

SST: 09608-87604-000

09611-87506-000

4. Install the outer race (outer side) of the tapered roller bear-

ing, using the following SST.

09608-87603-000

09611-87506-000

5. Fill the specified amount of lithium-based MP grease to a

space between the outer races of the inner and outer bear-

Filling Amount:

35 - 40 grams

FRONT AXLE & SUSPENSION

Chapters

Table of Contents