Assembly Of Shift Select Shaft - Daihatsu F300 Service Manual

Hide thumbs Also See for F300:

Table of Contents

TRANSMISSION & TRANSFER

3. Remove the control shaft and control shaft boot.

4. Remove the T/M shift lever ball seat.

ASSEMBLY OF SHIFT

SELECT SHAFT No. 1

1. Install the TIM shift lever ball seat with your fingers.

2. Apply lithium-based mulf1-purpose grease to the ·Inner sur-

face of the seat.

3. Install the control shaft and control shaft boot.

Install the control shaft boot in such a way that the

breather hole of the control shaft boot may face toward

the transmission case side (lower side).

4. Drive the new slotted pin of the shift outer lever into position.

5. Connect the shift a select No. 1 shaft and control shift

Chapters

Table of Contents