Outline; Dimensions - Panasonic BT-LH1760W Operating Instructions Manual

Outline

The BT-LH1760 LCD monitor was designed especially for broadcasting service and business use. It is equipped
with a high performance 17.0-inch wide LCD display panel.
■ High performance LCD panel
This monitor achieves outstanding color reproduction, a wide viewing angle, and high-speed response.
The double-speed drive in the BT-LH1760 has substantially reduced image lag.
■ Immediate image output of input signals
The time-lag caused by IP field unit conversion
output has been suppressed to the absolute minimum.
*1 Conversion from interlace to progressive scanning.
■ Multi-format image compatibility
• This monitor is equipped with SDI (HD/SD compatible), VIDEO, YP
• It supports both NTSC and PAL TV broadcast systems.
■ A host of functions
• Split-screen function
You can divide the screen into two windows, and compare the windows for critical color matching using the
same input terminal and same format.
• Pixel-to-pixel mode
During HD signal input, use this feature to see video in its native resolution (that is every pixel of the original
corresponds to one pixel on the screen).
• Time code display
During HD SDI input, you can select to display VITC, LTC or UB time code.
• Closed caption
During VIDEO (NTSC) input, this feature displays the closed caption information embedded in the video signal.
(EIA-608 compliant)
• Waveform and vector display
This feature shows the waveform (for SDI, VIDEO and YP
• Cross hatch overlay function
Displays markers at regular vertical and horizontal intervals to facilitate composition.
■ REMOTE control
Depending on the intended use of the monitor, you can select between parallel remote control (GPI) and serial
remote control (RS232C).

Dimensions

Unit: mm (inches)
16(0.6)
*1
has been eliminated, and the delay from input until image
30(1.2)
260(10.2)
(Opening)
371.6(14.6)
Center
430(16.9)
280(11.0)
233(9.2)
128(5.0)
P /RGB, DVI-D (HDCP compatible) input jacks.
B R
P inputs) and vector display (for SDI input) of input signals.
B R
72
(2.8)
70
(2.8)
40 81.1
16(0.6)
(1.6) (3.2)
198(7.8)
When installing the monitor in one place permanently, we
recommend that you fix the monitor in place using the screw
holes in the lower part of the stand.
100(3.9)
75(3.0)
7