Table of Contents
Advertisement
CONTROLS AND DISPLAY
This Quick Reference Guide is applicable
to product firmware version 2.20 or
greater. Features applicable to the GSM
option are only present on version 2.30 or
greater. The transmitter version number
can be obtained by keying >0
When the unit is taken out of storage and
installed for first use, remove the
protective label (if fitted) from the front to
allow light to activate the unit.
If the instrument is not powered, connect
any batteries or external supply as
detailed in the Installation Manual.
Important. Read the manual
for battery condition monitoring.
PROGRAMMING
Setting up the PC – HyperTerminal Setup
(Example from Windows NT – other versions of
Windows vary)
From the Windows Start menu choose Programs
– Accessories – Hyperterminal – HyperTerminal.
At 'New connection' enter : AquaMaster
At 'Connect using' choose : COM1 or COM2
(depending on the PC connection)
At 'Port setting' prompt choose Bits per second:
4800, Data bits: 8; Parity: None; Stop bits: 1; Flow
control: none.
Programming the AquaMaster
To access programming mode, connect the
AquaMaster to a computer via either of the serial
port connections (but note that the GSM-
equipped version does not have a remote port) –
see Instruction Manual ('Local or Remote
Computer Connection' sections).
Use serial port settings: Baud: 4800; Data bits 8;
Stop bits: 1; Parity: no.
Press
Tab
3 times to activate the programming
mode.
Upper Display
Date
Forward Flow Total
Reverse Flow Total
Net Flow Total
Tariff Total
88888.888.
AB
.8.8.8.80
0 -
Tariff
Pictorial Displays
Indicator
The following display appears on the computer
screen:
AquaMaster...
Nav Mode: TAB, Disp Mode: Ctrl + W
Pressing the
initiates display mode, with the same information
as that on the transmitter display.
Press
Esc
Pressing the
screen:
[Next Menu=TAB][Next Item=ENTER]
[Edit = SPACE][Exit = ESC]
1.0 Information
Lower Display
Time
Flow Velocity
Pressure
8
gal
3
f t m
/ h M G D
g a l / s m B a r p s i
Left Battery Warning
Sensor Fault
Empty Pipe
Mains Failure
Right Battery Warning
Display
+
keys simultaneously
Ctrl
W
to cancel display mode.
key produces the following
Tab
3
m
1
Advertisement
Table of Contents
