Controls And Display - ABB AquaMaster Quick Reference Manual

Electronic commercial water meter
Hide thumbs Also See for AquaMaster:
Table of Contents

Advertisement

CONTROLS AND DISPLAY

This Quick Reference Guide is applicable
to product firmware version 1.25 or
greater. The transmitter version number
can be obtained by keying >0
When the unit is taken out of storage and
installed for first use, remove the
protective label (if fitted) from the front to
allow light to activate the unit.
If the instrument is not powered, connect
any batteries or external supply as
detailed in the Installation Manual.
Important. Read the manual
for battery condition monitoring.
PROGRAMMING
Setting up the PC – HyperTerminal Setup
(Example from Windows NT – other versions of
Windows vary)
From the Windows Start menu choose Programs
– Accessories – Hyperterminal – HyperTerminal.
At 'New connection' enter : AquaMaster
At 'Connect using' choose : COM1 or COM2
(depending on the PC connection)
At 'Port setting' prompt choose Bits per second:
4800, Data bits: 8; Parity: None; Stop bits: 1; Flow
control: none.
Programming the AquaMaster
To access programming mode, connect the
AquaMaster to a computer via either of the serial
port connections – see Instruction Manual ('Local
or Remote Computer Connection' sections).
Use serial port settings: Baud: 4800; Data bits 8;
Stop bits: 1; Parity: no.
Press
twice to activate the programming
Tab
mode.
2
All manuals and user guides at all-guides.com
Upper Display
Date
Forward Flow Total
Reverse Flow Total
Net Flow Total
Tariff Total
AB
Tariff
Indicator
The following display appears on the computer
screen:
Pressing the
initiates display mode, with the same information
as that on the transmitter display.
Press
Pressing the
screen:
Lower Display
88888.888.
3
f t m
/ h M G D
.8.8.8.80
0 -
g a l / s m B a r p s i
Pictorial Displays
Left Battery Warning
Sensor Fault
Empty Pipe
Mains Failure
Right Battery Warning
Controls and Display
AquaMaster...
Nav Mode: TAB, Disp Mode: Ctrl + W
+
Ctrl
W
to cancel display mode.
Esc
key produces the following
Tab
[Next Menu=TAB][Next Item=ENTER]
[Edit = SPACE][Exit = ESC]
1.0 Information
Time
Flow Velocity
3
m
8
gal
keys simultaneously

Advertisement

Table of Contents
loading

Table of Contents