Troubleshooting For Installation - Panasonic KX WP1050 Operating Instructions Manual

Getting Started

Troubleshooting for installation

If problems occur while installing the base unit, you can refer to the check list below.
For up-to-date support information, visit http://www.panasonic.com/help. Please refer
to it along with this guide for troubleshooting.
Connection:
Problem
The modem is connected
but the WAN indicator is
off.
The Ethernet is
connected but the LAN
indicator is off.
54
For assistance, please visit http://www.panasonic.com/help
Solution
L Check that the modem and this product are connected.
L Check that the power of the modem and this product
are turned on.
L It is possible that the Ethernet cable is torn apart. Check
a link lamp of the device that the base unit is connected
to.
L Check the computer connection.
L Check that the computer is turned on.
L Check that the LAN card and driver are installed on the
computer.
L It is possible that the Ethernet cable is torn apart. Check
a link lamp of the device that the base unit is connected
to.