Error Messages - Panasonic KX WP1050 Operating Instructions Manual

Error messages

If the unit detects a problem, one of the following messages is shown on the handset
display.
Network:
Display message
Networks were not
found.
Could not connect
to <Network name>
Could not get IP
address from
<Network name>
Failed to connect
to the base unit.
Register again.
Sign in:
Display message
Your Skype name and
password were not
recognized.
Sign in was not
successful.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L Move closer to the base unit or an access point.
L Press {Search} to search for networks again.
L Press {Options} i Select "Add manually" to add
network manually.
L Press {Options} i Select "Preferred networks"
to configure preferred networks list.
L A network connection failed.
L Check that the security type and the network key are
correct.
L Press {OK} i Re-connect the network again.
L The handset could not get an IP address automatically.
L Check that the DHCP server of the base unit is enabled.
L Make sure the Static IP address of the computer uses
the same address as DHCP lease address.
L The handset is not registered to the base unit.
L Resister the handset (page 133).
Cause/solution
L The Skype name and/or password you entered are not
correct.
L Press {Retry} i Re-enter the Skype name and
password correctly.
L Check the network connection.
L Press {Retry} to try again.
Useful Information
211