Setting Your Computer - Panasonic KX WP1050 Operating Instructions Manual

Setting your computer

Obtaining an IP address automatically on your computer
When you cannot log in the base unit by using the computer you connected to the Ethernet
(LAN) port on the base unit, check the Local Area Connection setting on the computer. It
is necessary to obtain an IP address automatically from a DHCP server.
L You must be logged in as an administrator in order to set the Local Area Connection.
1
Click [Start], then click [Control Panel].
2
Click [Network and Internet Connections], then click [Network Connections].
3
Right-click the Local Area Connection icon connected to the base unit, then select
[Properties].
4
Select [Internet Protocol (TCP/IP)], then click [Properties].
For assistance, please visit http://www.panasonic.com/help
Base Unit Settings
203