Motion Detection Setup Wizard - D-Link DCS-2210L/UPA User Manual

Section 4: Configuration

Motion Detection Setup Wizard

This wizard will guide you through a step-by-step process to configure your camera's
motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the detection sensitivity,
and adjust the camera's ability to detect movement.
You may specify whether the camera should capture a snapshot or a video clip when motion
is detected.
Please see the Motion Detection section on Motion Detection on page 39 for information
about how to configure motion detection.
Step 2
This step allows you to enable motion detection based on a customized schedule. Specify the
day and hours. You may also choose to always record whenever motion is detected.
D-Link DCS-2210L/UPA User Manual
27