Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance SR 1005P
Summary of Contents for Nilfisk-Advance SR 1005P
- Page 1 SWEEPER SR 1005P MANUALE D’USO E MANUTENZIONE INSTRUCTION MANUAL FOR USE AND MAINTENANCE MODE D’EMPLOI ET D’ENTRETIEN BEDIENUNGS UND WARTUNGSANLEITUNG S31N1005P(1)00-11...
- Page 2 Max axel rear: Power: Max axel front: Tot weight: Noise level: Tot weight: Voltage: (w/o battery) Type G&E Floor cleaning machine. MADE IN ITALY Nilfisk-Advance Italia Località Novella terza 26862 Guardamiglio (Italia) ITALIANO ENGLISH 9-16 FRANCAIS 17-24 DEUTSCH 25-32 ESPAÑOL...
-
Page 3: Changes And Improvements
S31N1005P(1)00-11 TABLE OF CONTENTS MODEL_________________________________________ SERIAL NUMBER_________________________________ INTRODUCTION GENERAL SAFETY RULES AND GENERAL SAFETY INFORMATION PAG.9 Carefully follow the rules described below to avoid injury SPARE PARTS AND MAINTENANCE to the operator and damage to the machine. CHANGES AND IMPROVEMENTS Carefully read the labels on the machine, do not cover NAME PLATE them for any reason and replace them immediately if... -
Page 4: Technical Data
S31N1005P(1)00-11 UNPACKING TECHNICAL DATA When the machine is delivered, carefully inspect TECHNICAL DATA VALUES the shipping carton and the machine for damage. If Engine type Petrol Honda G150 K1 damage is evident, save the shipping carton so that Max power at 3600 RPM 3,8Hp 2,6kW it can be inspected by the carrier that delivered it. -
Page 5: Recharging The Batteries
S31N1005P(1)00-11 FILLING UP THE BATTERIES poles, the bridge connects the two batteries in For filling the batteries follow these instructions: series. lift the seat cover Last, connect the NEGATIVE POLE and cover it with disconnect the battery power cable and remove the the insulator. - Page 6 S31N1005P(1)00-11 DISPLAY “turtle” symbol. Set the switch to the “hare” The display has three functions: symbol for a faster speed as required. a) voltmeter b) hour meter Turn on the front light, if necessary, using the c) safety code display button 5 indicated on the figure A.
-
Page 7: Side Brush Adjustment And Replacement
S31N1005P(1)00-11 counterclockwise. To reactivate the drive wheel, Pull out the worn broom. turn the red key clockwise (Fig. 14) WARNING: do not apply any pressure to the In case the new broom steering column! Push the machine backwards only. does not have a flange, (Fig. -
Page 8: Filter Cleaning
S31N1005P(1)00-11 FILTER CLEANING With the aid of a funnel pour the new oil (TYPE SAE 15W40) through the level control hose, put the level stick back to place and put the cap back on the The panel filter must be cleaned regularly. waste pipe. - Page 9 S31N1005P(1)00-11 MAINTENANCE Warning: these operations must carried out with the machine stopped, the parking brake set and with the key switched off. All periodic or extraordinary maintenance operations must be performed by skilled personnel, or by an authorized service center. EVERY EVERY EVERY...
-
Page 10: Safety Functions And Troubleshooting
S31N1005P(1)00-11 SAFETY FUNCTIONS AND TROUBLESHOOTING SAFETY MICROSWITCH It is activated when the seat cover is lifted , and it stops the petrol engine as well as the fan and the main broom. (Fig. 24) MAIN BROOM SAFETY DEVICE The operator has to lift the cover to reach the lid latch of the main broom compartment (Fig. - Page 11 S31N1005P(1)00-11...
- Page 12 Plymouth, MN 55447-3408 Doornveld/Sphere Business Park Tel. +1612 475 2235 - Fax 1612 473 1764 Industrie Asse 3, nr 11- bus 41 1731 Zellik-Asse Nilfisk-Advance of America, Inc. Tel.(02) 467.60.50 Fax (02) 463.44.16 300 Technology Drive Malvern, PA 19355 CANADA Nilfisk-Advance Ltd Tel.(610) 647 647-6427...
Need help?
Do you have a question about the SR 1005P and is the answer not in the manual?
Questions and answers