Operation - Sharp FP-FM40A Operation Manual

OPERATION

CLEAN AIR
START
CLEAN ION SHOWER
Releases high-density Plasmacluster ions and discharges strong air flow for 60 minutes.
START
FAN SPEED
AUTO SLEEP
OM_FP-FM40A_EN.indd 8
STOP
NOTE
• CLEAN ION SHOWER mode is available while using
mosquito catcher mode.
• If Plasmacluster Ion is OFF, Plasmacluster Ion will not be
released.
• When the operation finishes, the unit will return to the prior
operation mode.
It is able to change the other mode and
mode.
NOTE
AUTO
• The fan speed is automatically switched depending on the
amount of impurities in the air. The sensors detect impurities
for efficient air purification.
MED MAX
SLEEP
• The unit will operate very quietly, and the fan speed
is automatically switched depending on the amount of
impurities in the air.
It will darken the brightness of the following lamp.
CATCH Lamp / UV Light Lamp / GLUE SHEET Lamp /
UV Light of the backside.
DUST/PLASMACLUSTER SIGN go off automatically.
Even though the indicator is off, Plasmacluster Ion is
released into air unless Plasmacluster Ion is turned off by
pressing
• Select the desired fan speed.
• Unless the power cord has been
unplugged, the operation starts in the
previous mode it was operated in.
for 3sec.
E-8
during this
16/07/04 13:09