Sharp FP-FM40A Operation Manual page 11

MOSQUITO CATCHER
Use this function to catch mosquitoes.
Mosquito catching function(CATCH lamp) will turn on when both UV LIGHT and GLUE SHEET work
properly.
NOTE
Select Max mode to catch mosquitoes more effectively.
The higher the air volume is, the easier to capture mosquitoes becomes.
CATCH lamp
When UV LIGHT lamp is on and GLUE SHEET lamp is on, CATCH lamp is on.
When UV LIGHT lamp is off or GLUE SHEET lamp is flashing, CATCH lamp is off.
UV LIGHT lamp
When Mosquito Catcher button is pressed, UV LIGHT lamp is turned on and conversely.
UV LIGHT
off
UV LIGHT
flashing
GLUE SHEET lamp
flashing
• Flashing Glue Sheet lamp indicates time to change Glue Sheet.
Glue Sheet comes in 3 layers with each layer laminated. Change the Glue Sheet by peeling off
the used one. When all layers have been used, replace with a new sheet.
Press the Mosquito Catcher button for 3 seconds.
Glue Sheet lamp changes from flashing to lighting.
• Glue Sheet lamp flashes approx. 1 month(24 hours x 30 days) after you press Mosquito Catcher
button for 3 seconds.
• At the first time of using the product, after inserting a plug in a socket and turning on the power,
Glue Sheet lamp will be flashing by default. Install Glue Sheet to catch panel (see page E-7),
then press the Mosquito Catcher button for 3 seconds.
• We recommend you to keep this product working as much as possible to maximize its function
except for exchanging filter and Glue sheet.
OM_FP-FM40A_EN.indd 9
UV Light ON
When Catch Panel comes off, UV light is turned off automatically by
Magnet sensor. Check whether catch panel is properly attached.
When UV LIGHT lamp is flashing, UV Light has failed. Contact the
service center authorized by Sharp.
Press 3 seconds
E-9
UV Light OFF
16/07/04 13:09