Table of Contents
Advertisement
SYMPTOM
GLUE SHEET Lamp is flashing
No mosquitoes are collected on the
Glue Sheet.
When the adhesive glue remains on
clothes, skin, floor, etc.
SLEEP lamp is flashing.
SPECIFICATIONS
Power supply
Fan
Speed
Operation
Recommended Room Size (m
High density Plasmacluster ion recommended room size (m
Cord Length (m)
Dimensions (mm)
Weight (kg)
*1 The fan speed is automatically switched depending on the amount of impurities in the air.
*2 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the floor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
OM_FP-FM40A_EN.indd 17
Peel off one layer or exchange a new Glue Sheet set when all
layers have been used.
Then, press the Mosquito Catcher button for 3 sec.
• Try relocating the unit.
• Peel off one layer or exchange a new Glue Sheet set.
• Wipe with cooking oil, then wash with soap and water.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
Fan Speed
Rated Power (W)
3
Airflow (m
/hour)
2
)
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
220 V
MAX
33
240
2
)
394(W)×281(D)×540(H)
E-17
50 Hz
MED
SLEEP
*1
14
3.7~6.2
150
48~90
~30
*2
~23
*3
2.0
5.8
16/07/04 13:09
Advertisement
Table of Contents
