Filter And Glue Sheet Installation - Sharp FP-FM40A Operation Manual

FILTER AND GLUE SHEET INSTALLATION

To maintain the quality of the filter and Glue Sheet, it is installed in the main unit and packed in
plastic bag. Be sure to remove the filter and Glue Sheet from the plastic bag before using the unit.
1
Remove the Catch Panel from
underpart.
2
Hold the tabs of Pre-filter, lift it
and remove it from its under-
part.
3
Remove the plastic bag and
take out the Filter.
OM_FP-FM40A_EN.indd 6
4
5
6
E-6
Hold upper part of Active Carbon
Deodorizing Filter, covering the
upper part of HEPA Filter, and set
it.
HEPA Filter
Active Carbon Deodorizing Filter
Hold the tabs of Pre-Filter, and
replace it from upper part.
Fill in the usage start date on the
Date Label.
Use the date as a guide for the
filter replacement schedule.
Date Label
FILTER
. .
. .
Starting date of use
. . . .
. . . .
16/07/04 13:09