Logging‐In To The Camera For The First Time (Windows) - TRENDnet TV-IP420P User Manual

TRENDnet User's Guide
Logging‐in to the Camera for the First Time (Windows)
1. Open the web browser (Internet Explorer, Firefox or Safari) on your
computer. In the address bar, enter the IP address you setup through the
setup CD or 192.168.10.30.
(If you have a DHCP server on your network, the IP address will be
assigned dynamically. For example, if you have a home gateway on your
network and you plug‐in the camera on the same network, you can find
the camera's IP address on your home gateway.), and then press Enter.
2. Enter the user name, admin, and the password you setup through the
setup CD or the default password, admin, and then click OK.
© Copyright 2016 TRENDnet. All Rights Reserved.
3. The camera management page will detect if you installed the camera
video streaming plug‐in or not. Click the link to download the plug‐in from
the TV‐IP420P camera.
4. Download the plug‐in to your computer and then and close your browser.
Launch the plug‐in installation to install the plug‐in.
TV‐IP420P
13