Access Your Camera With The Web Browser; System Management And Default Settings; Logging-In To The Camera For The First Time (Windows) - TRENDnet TV-IP311PI User Manual

Trendnet outdoor 3 mp poe dome day/night network camera
Hide thumbs Also See for TV-IP311PI:
Table of Contents

Advertisement

TRENDnet User's Guide

Access your Camera with the Web Browser

System Management and Default Settings

It is recommended that you install your camera with the CD that comes with
the package and use accompanying TRENDnetVIEW Pro software (version
2.4.3 or later) for Windows computers. The software is included on the CD
comes with the package. If you do not have the CD with you, you can go to
http://www.TRENDnet.com/support enter the model number "TV-IP311PI"
and download the software.
If you didn't go through the TV-IP311PI CD installation wizard or you have
reset the TV-IP311PI to factory defaults by pressing and holding reset
button while power on the camera and keep holding the button for over 10
seconds, your TV- IP311PI has following settings:
System Default
Management
Dynamic assigned if there's a DHCP server on the
IP
network or self-assigned 192.168.10.30
Administrator
admin
name
Administrator
admin
password
If you want to access your camera directly instead of using software, you
can follow the steps specified in this chapter to login to your camera. A web
browser plug-in must be installed to watch video smoothly.
For Windows system, please go to the next paragraph.
For OS X system, please go directly to page 17
© Copyright 2014 TRENDnet. All Rights Reserved.

Logging-in to the Camera for the First Time (Windows)

1. Open the web browser on your computer. In the address bar, enter the
IP address you setup through the setup CD or 192.168.10.30.
(If you have a DHCP server on your network, the IP address will be
assigned dynamically. For example, if you have a home gateway on your
network and you plug-in the camera on the same network, you can find
the camera's IP address on your home gateway.), and then press Enter.
2. Enter the user name, admin, and the password you setup through the
setup CD or the default password, admin, and then click OK.
TV-IP311PI
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents