TRENDnet User's Guide
PTZ (Pan/Tilt/Zoom)
Basic
Basic Parameters
Enable Proportional Pan: If you enable this function, the pan/tilt speeds
change according to the amount of zoom.
Preset Speed: You can set the speed of defined preset from 1
to 8.
Keyboard Control Speed: Define the speed of PTZ control by a keyboard as
Low, Normal or High.
© Copyright 2016 TRENDnet. All Rights Reserved.
Auto Scan Speed:
The camera provides 5 scan modes: auto scan,
tilt scan, frame scan, random scan and
panorama scan. The scan speed can be set from
level 1 to 40.
Max. Tilt‐angle:
The maximum angle that the camera can revolve
in the tilt direction is adjustable. The values
range from (0‐90) to (‐5‐90)
Auto Flip:
You can enable/disable the auto flip function
PTZ OSD
Zoom Status:
Set the OSD duration of zooming status as 2
seconds to 10 seconds, always on or off.
PT Status:
Set the angle display duration white panning
and tilting as 2 seconds to 10 seconds,
always on or off.
Preset Status:
Set the preset name display duration as 2
seconds to 10 seconds, always on or off.
POWER OFF MEMORY
Set Resume Time Point:
The camera can resume its previous PTZ status
or actions after it is restarted from a power‐off.
You can set the time point of which the camera
resumes its PTZ status from 30 seconds up to
600 seconds before power‐off.
Click Save to save the changes
TV‐IP420P
53