Dhcp Server - TP-Link TOUCH P5 User Manual

Chapter 3
5. Tap Default Gateway
in the same subnet as the IP address.
6. Tap Save.
3. 7.

DHCP Server

The DHCP Server app can configure your Touch P5 to act as a DHCP (Dynamic Host
Configuration Protocol) server to assign IP addresses to its clients and view client
information from the client list. To use the DHCP server function of your Touch P5, you
must configure all computers on the LAN as
can also manually reserve an IP address for a client that is connected to your Touch P5.
Once reserved, the IP address will only be assigned to the client by the DHCP server.
1. On the menu screen, tap the
2. Configure the DHCP settings as needed.
¾ To set DHCP server of your Touch P5:
1 ) Select DHCP
to enter the gateway in dotted decimal notation . It should be
DHCP Server
Server.
Configure Touch P5 as a Repeater
Obtain an IP Address
icon to start it.
automatically. You
69