TP-Link TOUCH P5 User Manual page 43

Chapter 2
Note:
You can also access your USB disk using your Network/Media Server Name. Refer to
USB Disk to learn more.
Customize Your Settings
¾ To only share specific content
By default, Share All
to only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, and then log in with the username and password you set
for your Touch P5.
2. Select Basic > USB Settings
Click the button to disable
3. Select the Volume Name
4. Decide the way you share the folder:
• Allow Guest Network
access the shared folder.
• Enable Authentication: Tick to enable authentication for this folder sharing,
and you will be required to use a username and password to access the USB
disk. Refer to
• Enable Write
folder.
is enabled so all contents on the USB disk are shared. If you want
> Sharing
Share All, and then click
and Folder Path, and then enter a
Access: Tick to allow the clients in your guest network to
To Set up Authentication for Data Security
Access: If you tick this check box, network clients can modify this
Configure Touch P5 as a Router
Access. Focus on the
Add to add a new sharing folder.
Folder Name
to learn more.
To Customize the Address of the
Folder Sharing section.
as you like.
38