Wire Harness Set (2Cr-F2590-70) - Yamaha YZF-R1 Kit Manual

3. Wire Harness Set (2CR-F2590-70)
Parts List
No. PART No.
1 2CR-82590-70
° 2 2CR-82386-70
° 3 2CR-82318-70
° 4 2CR-82309-70
° 5 2CR-8231Y-70
° 6 2CR-83553-70
7
2CR-2128A-70
* 8 90480-13003
9 90560-06201
*
* 10 90111-06051
* 11 95607-06200
12 2CR-2161E-70
* 13 90338-06018
* 14 120-82131-00
* 15 90111-06051
16 2CR-2161G-70
* 17 14B-8183G-01
This wire harness is weight-saved by doing
away with connecting wires for lights.
WIRE, SUB-LEAD
Parts List
No. PART No.
20 2KS-82509-70
This wire harness is for mounting the KIT
harness to a vehicle with the Electric racing
suspension (ERS) function.
TIP
If the E-SD (STD steering damper) is not
used, removing its coupler will pose no
problem.
NOTICE
•
Before using the KIT ECU for the first
time, use YMS to perform writing of
the base map.
•
Remove the coupler of the main switch
before starting assembling work.
PART NAME
WIRE HARNESS ASSY.
WIRE, SUB-LEAD
WIRE, SUB-LEAD
WIRE, SUB-LEAD
WIRE, LEAD
WIRE, LEAD
BRKT., REGULATOR 1
GROMMET
SPACER
BOLT, HEX. SOCKET BUTTON
NUT, U FLANGE
BRKT.,4
PLUG
BAND, BATTERY
BOLT, HEX. SOCKET BUTTON
BRKT.,6
CORD COMP.
PART NAME
WIRE, SUB-LEAD
NOTICE
•
•
•
– 6 –
Q'TY
1 MAIN HARNESS
1 TH INJECTOR
1 AC INJECTOR
1 IGNITION COIL
1 FUEL PUMP
1 METER
1
2
2
2
2
1
3
1
1
1
1
Q'TY
1 SCU
Do not remove the AC generator but
leave it to function. Use on the battery
alone will make the machine unable to
run in a short time.
This wire harness only works when
used in combination with the ECU
(2CR-8591A-70, 71) of the kit.
Using the KIT ECU disables the ABS
function of the brake, but do not
remove the Hydraulic unit assy. and
connect it to the wire harness of the
kit. Without this connection, any
computerized controls will not work.
REMARKS
REMARKS