Air Funnel Set (2Cr-1440B-70) - Yamaha YZF-R1 Kit Manual

14. Air Funnel Set (2CR-1440B-70)
Parts List
No. PART No.
1 2CR-14479-70
2 2CR-14469-70
3 92014-06025
4 2CR-1446C-70
5 92014-06025
Installation
1. Assembling the primary funnel
Secure the primary funnel 1 and 2 to the
throttle body with the supplied button head
bolts. At this time, install the STD lever 1 and
2 and fix them.
2. Assembling the secondary funnel
Install the secondary funnel to the lever 1
and 2. Then, fit the STD bushes to the lever
assembling positions. (5 locations)
MODEL CAMSHAFT (IN) CAMSHAFT (EX) VALVE SPRING
2015
2CR-12170-70 2CR-12180-70 2CR-A2110-70
2016
PART NAME
SECONDARY FUNNEL
PRIMARY FUNNEL 1
BUTTON HEAD BOLT
PRIMARY FUNNEL 2
BUTTON HEAD BOLT
Lever 1
Lever 2
Bush (5 locations)
Q'TY
1
1
3
1
3
TIP
The STD seal rubber is not used at the
bottom sur face (face to the primar y
funnel) of the secondary funnel.
Ycci System Control
You can use the Ycci system as the kit funnel.
You can control the operation timing by using
the YMS software packed together with the
kit ECU.
You can also control the STD funnel by using
the YMS software.
The set of the camshaft, valve spring, ECU
and air funnel must be used in the following
combination.
NOTICE
Using in other combinations may possibly
damage the engine.
Be sure to use in the combination as
stated below.
2CR-8591A-70 MGC-191114-00
2CR-8591A-71 2CR-1440B-70
– 31 –
REMARKS
ECU AIR FUNNEL SET