Yamaha YZF-R1 Kit Manual page 25

TIP
When viewing logging data, analog Ch is
not displayed by Y-TRAC default setting.
To display it, tap Graph Setting in the
Graph Option mode.
On the screen, tap AIN-1 or AIN-2 to
display the arbitrary CH.
In the analog display mode, the voltage is
indicated by level (0 to 5) by default. The
display value can be changed according
to the specif ication of the installed
sensor. To change the display value, tap
AIN Setting.
<Example 1>
When the following is stated in the
sensor's manual
"AF value: voltage x 1.6 +10"
Factor 1.6000
Offset 10.0000
Min Y-axis 10.00
Max Y-axis 20.00
(Min Y-axis and Max Y-axis can be any
given values)
<Example 2>
When the following is stated in the
sensor's homepage
"Output voltage is three times the λ value."
↓
AF value: output voltage x 14.7 / 3
Factor 4.9000
Offset 0.0000
Min Y-axis 10.00
Max Y-axis 20.00
(Min Y-axis and Max Y-axis can be any
given values)
– 22 –