Kenwood DDX374BT Instruction Manual page 56

SETTINGS SETTINGS
3
<Application Updates the system
Version> application.
<System Version> Updates the system.
<DVD Version> Updates the DVD system
application.
It may take a while.
If the update has been completed successfully,
"Update Completed" appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
56
❏ Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1
Display the <Touch Panel Adjust> screen.
On the Home screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2
Touch the center of the marks at the upper
left (1), the lower center (2), then the
upper right (3) as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].