For Proper And Safe Use - Minolta Dimage Scan Elite 5400 Hardware Manual

FOR PROPER AND SAFE USE

Read and understand all warnings and cautions before using this product.
WARNING
• Use only within the voltage range specified on the unit. Inappropriate current may
cause damage or injury through fire or electric shock.
• Use only the specified AC adapter (Ya Hsin Industrial 019-240840) within the voltage
range indicated on the adapter unit. An inappropriate adapter or current may cause
damage or injury through fire or electric shock.
• Do not disassemble this product. Electric shock may cause injury if a high-voltage
circuit inside the product is touched. Take the product to a Minolta Service Facility
when repairs are required.
• Immediately unplug the unit and discontinue use if the product is dropped or
subjected to an impact in which the interior is exposed. The continued use of a
damaged product may cause injuries or fire.
• Store this product out of reach of children. Be careful when around children not to
harm them with the product or parts.
• Do not operate this product or handle the power cord with wet hands. Do not place a
container with liquid near the product. If liquid comes in contact with the product,
immediately unplug the unit. The continued use of a product exposed to a liquid may
cause damage or injury through fire or electric shock.
• Do not insert hands, inflammable objects, or metal objects such as paper clips or
staples into this product. It may cause damage or injury through fire or electric shock.
Discontinue use if an object enters the product.
• Do not use the product near inflammable gases or liquids such as gasoline, benzine,
or paint thinner. Do not use inflammable products such as alcohol, benzine, or paint
thinner to clean the product. The use of inflammable cleaners and solvents may
cause an explosion or fire.
• When unplugging the unit, do not pull on the power cord. Hold the adapter unit when
removing it from an outlet.
• Do not damage, twist, modify, heat, or place heavy objects on the power cord. A
damaged cord may cause damage or injury through fire or electric shock.
• If the product emits a strange odor, heat, or smoke, discontinue use. Immediately
unplug the product. The continued use of a damaged product or part may cause
injuries or fire.
• Take the product to a Minolta Service Facility when repairs are required.
CAUTION
• Damage or injury through fire or electric shock may result if the product is used or
stored in the following conditions:
In humid or dusty environments
In direct sunlight or hot environments
In smoky or oily areas
In unventilated areas
On unstable or unlevel surfaces
2 F
OR PROPER AND SAFE USE
• This product should only be operated in the upright position. Inappropriate placement
may result in fire.
• Insert the plug securely into the electrical outlet.
• Do not use if the cord is damaged.
• Do not connect the ground to a gas pipe, telephone ground, or water pipe. Improper
grounding can result in injury from electric shock.
• Do not cover the AC adapter. A fire may result.
• Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit
in emergencies.
• Unplug the product when cleaning or when the unit is not in use for long periods.
• Periodically check that the power cord is not damaged and the plug is clean. Dust
and dirt that may collect between the prongs of the plugs may result in fire.
Every necessary precaution has been taken to ensure the accuracy of this instruction
manual. Minolta is not responsible for any loss or damage caused from the operation
of this product. This manual may not be copied in part or whole without prior written
permission from Minolta.
As an E S ® Partner, Minolta has determined that this product meets the
NERGY TAR
E S guidelines for energy efficiency.
NERGY TAR
This mark certifies that this product meets the requirements of the EU (European
Union) concerning interference causing equipment regulations. CE stands for
Conformité Européenne.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Tested by the Minolta Corporation 101 Williams Drive Ramsey, New
Jersey 07446 USA.
Do not remove the ferrite cores from the cables.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The sound pressure level is less than 70dB according to ISO 3744 or ISO 7779.
Microsoft, Windows, Windows 98, Windows Me, Windows 2000 Professional, and Windows XP are
registered trademarks of the Microsoft Corporation. Macintosh, Apple, and Power Macintosh are
registered trademarks of Apple Computer, Inc. Adobe and Photoshop are registered trademarks of
Adobe Systems Incorporated. CorelPhotoPaint is a trademark of the Corel Corporation. Paint Shop
Pro is the copyright of Met's Corporation. Digital ICE
trademarks of registered trademarks and technologies of Applied Science Fiction, Inc in U. S. A.
Other corporate and product names are the trademarks and registered trademarks of their
respective companies.
3 , Digital ICE, Digital ROC, and Digital GEM are
3