Utilities Tab - Paramount Fitness ME II User Manual

Paramount User Guide
corrections. This data is saved to the control system's Flash RAM, and will be always be used
to correct the mount's periodic error (provided the Apply PEC Corrections checkbox is turned
on).
Step 3 Save the PEC Curve to the Paramount Firmware
Click the Save button to save this curve into the Paramount's PEC table (that is, the curve is
saved in the control system's flash RAM for permanent use).
Step 4 Apply PEC Corrections
1. From TheSkyX Professional Edition, connect to the Paramount by clicking the Connect
command on the Telescope menu.
2. Open the Bisque TCS window (see page 120).
3. Click the Periodic Error Correction tab.
4. Turn on the Apply PEC Corrections checkbox.
Your Paramount will now use the optimal PEC curve for the errors in your worm/gear.

Utilities Tab

The Utilities tab provides access to many high-level control system settings.
Hemisphere Setup
Click the Hemisphere Setup text on the right side of the Utilities tab to configure the mount's tracking
direction and show hemisphere-specific mount status. (The home sensor values are shown only when the
mount is connected.)
148 | P a g e
Figure 80: Example hemisphere settings for the northern hemisphere.