First Time Paramount Setup; Paramount Usb Driver Installation - Paramount Fitness ME II User Manual

Robotic telescope system
Table of Contents

Advertisement

One Paramount power supply (included).
-Or-
An optional 48V Paramount ME II/MX Portable Power Supply. This battery comes in 5AH and
10AH models and can be purchased from the Software Bisque Store.

First Time Paramount Setup

Please make sure to carefully read the instructional insert in the Paramount box before unpacking the
mount.
After the Paramount has been unboxed and safely mounted to your tripod or pier, the next step is to
connect the power and communication cables to the Electronics Box so that mount can be turned on.
1. Plug the round end of the Paramount power cable into the port labeled 48V Power In on the
Electronics Box and the other into an electric outlet.
2. Plug the mini USB end of the USB 2.0 cable into the Electronics Box port labeled USB and the other
end into a free USB port on the computer.
3. Flip the On/Off switch up to the on position.
When the Paramount is turned on, three LEDs on the Electronics Box are illuminated and a short "whistle"
is emitted to indicate the control system has been successfully initialized. (The LEDs labeled RA and Dec
are orange; LED labeled TCS varies from blue to purple). Two successive beeps are emitted shortly
afterward indicating the servomotors have been initialized.
An example audio clip for a successful startup is available here:
Exactly when the two beeps occur may be different for each mount and will vary depending
on the mount's current mechanical orientation. The beeps may even occur simultaneously
so that only a single beep is audible.
If the LEDs on the Electronics Box are illuminated, and the mount homes, the control system
is functioning normally.

Paramount USB Driver Installation

Before attempting to control the Paramount from TheSkyX Professional Edition, make sure to install the
necessary drivers for your operating system.
inconsistent and unreliable communication between either the mount or the
camera or other USB device. See "USB Hubs and USB Extenders " on page 167
for more information on this topic.
http://www.bisque.com/sc/media/p/50821.aspx
Paramount User Guide
117 |
P a g e

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx+Myt

Table of Contents