Paramount User Guide
http://www.bisque.com/sc/shops/store/MXPowerSBIGSTL.aspx
Finger Lakes Instruments External Cable Specs
The Finger Lakes Instruments power supply uses a four pin male Kycon connector that is normally plugged
directly into the FLI camera head (see the port labeled 12V power supply in in Figure 103).
To power an FLI camera using the Paramount's built-in through the mount cabling, plug one end of the
male-to-male FLI External Power Cable (Figure 102) into the port labeled Power Out on the Instrument
Panel, and the other end into the port labeled Power on the FLI camera head (Figure 103).
Next, plug the male Kycon connector on the FLI power supply into the port labeled Power In on the
Electronics Box.
Figure 101: Finger Lakes Instruments external power cable wiring specifications (wire color may vary).
184 |
P a g e