Brake Fluid - BMW R 1200 S Rider's Manual

Checking brake pad
7
thickness, rear brakes
Brake pads worn past
78
the minimum permissible
thickness can cause a reduc-
tion in braking efficiency and
under certain circumstances
they can cause damage to
the brake system.
In order to ensure the de-
pendability of the brake sys-
tem, do not permit the brake
pads to wear past the minim-
z
um permissible thickness.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Visually inspect the brake
pads of the rear brake cal-
iper from the left to ascer-
tain their thickness.
Brake-pad thickness,
rear
Make sure that the brake disc
is not visible through the bore
in the inboard brake block.
If the brake disc is visible:
Have the brake pads re-
placed by a specialist work-
shop, preferably an author-
ised BMW Motorrad dealer.

Brake fluid

Checking brake-fluid
level, front brakes
A low fluid level in the
brake reservoir can al-
low air to penetrate the brake
system. This significantly re-
duces braking efficiency.
Check the brake-fluid level at
regular intervals.
Make sure the ground is
level and firm and hold the
motorcycle upright.