BMW R 1200 S Rider's Manual page 97

Install screw 1.
Replacing rear turn
indicator bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Remove screw 1.
Pull the glass out of the
reflector housing at the
threaded-fastener side.
Turn bulb 2 counter-
clockwise and remove it
from the bulb housing.
Replace the defective bulb.
Rear flashing turn indic-
ator bulbs
R10W / 12 V / 10 W
7
95
z