BMW R 1200 S Rider's Manual page 38

4
36
The Tripmaster display field
cycles through the following
sequence:
z
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
Residual range (once fuel
level is down to reserve)
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down Trip-
master button 1 until the
reading changes.
The tripmeter is reset to
zero.
Residual range
Residual range 1 is displayed
with the word RANGE
when the fuel level has
dropped to reserve. Residual
range is calculated on the
basis of your style of riding
and the amount of fuel left in
the tank; the reading indicates
the estimated distance you
can travel before the fuel
supply runs out.
If the motorcycle is resting
on its side stand, the level in
the tank cannot be measured
correctly, so this estimate of
only