BMW R 1200 S Rider's Manual page 96

Replacing front turn
7
indicator bulb
If it is not standing firmly,
94
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Switch off the ignition.
z
Remove screw 1.
Pull the bulb housing out
of the mirror housing at the
threaded-fastener side.
Remove the bulb holder 2
from the bulb housing by
turning it counter-clockwise.
Remove bulb 3 from the
bulb holder.
Replace the defective bulb.
Front flashing turn indic-
ator bulbs
R10W / 12 V / 10 W
Insert bulb 3 into the bulb
socket.
Turn bulb socket 2 clock-
wise to install it in the bulb
housing.
Seat the bulb housing in the
mirror shell.