The Back Panel - TP-Link TD-VG5612 User Manual

TD-VG5612

1.3.2 The Back Panel

Wi-Fi: The switch for the Wi-Fi function is on the top. Press the button to enable/disable the

Wi-Fi function.
WPS: The switch for the WPS function is on the top. For details, please refer to

Settings.
DSL: Through the port, you can connect the modem router with the telephone. Or you can

connect them by an external separate splitter. For details, please refer to
Modem Router.
PHONE2/PHONE1: The phone port connects to a phone set.

LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to

your PC or the other Ethernet network devices. In wireless router mode you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
USB: The USB port connects to a USB storage device, a USB printer or a 3G/4G Modem.

RESET: The switch for resetting the modem router.

Reset the modem router: There are two ways to reset the modem router's factory
•
defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 5 seconds. And the modem router will reboot to its factory default
settings.
Method two: Restore the default setting from
router's Web-based management page.
ON/OFF: The switch for the power.

POWER: The Power plug is where you will connect the power adapter.

300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide
Figure 1-2
6
2.3 Connecting the
4.22.7 Factory Defaults
4.8.2 WPS
of the modem