Rip Settings; Ipv6 Route Settings; Ipv6 Default Gateway - TP-Link TD-VG5612 User Manual

TD-VG5612
Gateway: Here you should type the Gateway address correctly, and the option for Interface

will adopt the default Gateway address for the Static Route.
Interface: Select the Interface name in the text box, or else, the default Use Interface will be

adopted for the Static Route.
Status: Select Enabled or Disabled from the drop-down list.

3. Click Save to save your settings as shown in Figure 4-87.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the Edit column.
Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete selected entries.

4.12.3 RIP Settings

Choose "Route Settings""RIP Settings", you can see the RIP (Routing Information Protocol)
screen which allows you to configure the RIP.

Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).

4.13 IPv6 Route Settings

Choose "IPv6 Route Settings", it includes two menus: IPv6 Default Gateway and IPv6 Static
Route. The detailed descriptions are provided below.

4.13.1 IPv6 Default Gateway

Choose "IPv6 Route Settings""IPv6 Default Gateway", you can see the Default Gateway
screen. You can select a WAN Interface from the drop-down list as the system default gateway.
300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide
Figure 4-88
93