Wireless Advanced - TP-Link TD-VG5612 User Manual

TD-VG5612
Click the Enable/ Disabled Selected button to make selected entries enabled or disabled.
Click the Delete Selected button to selected entries.
For example: If you desire that the wireless station A with MAC address 00:1D:0F:11:22:33 and the
wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the modem router, but
all the other wireless stations cannot access the Modem router, you can configure the Wireless
MAC Address Filtering list by following these steps:
1. Click the Enable button to enable this function.
Select the radio button "Allow the stations specified by any enabled entries in the list to
2.
access" for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New button.
1) Enter the MAC address 00:1D:0F:11:22:33/00:0A:EB:00:07:5F in the MAC Address field.
2) Enter wireless station A/B in the Description field.
Select Enabled in the Status drop-down list.
3)
4) Click the Save button.
The filtering rules that configured should be similar to the following list:

4.8.6 Wireless Advanced

Choose menu "Wireless""Wireless Advanced", you can configure the advanced settings of
your wireless network.
300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide
Figure 4-52
67