Nuna MIXX Instructions Manual page 13

22
Adjust Recline
1 There are 5 positions for the backrest.
2 To recline the backrest, squeeze the adjustment button,
then adjust the backrest to a desired angle.
3 To raise the backrest, push up.
!
Please note: when the backrest is in the flat
position squeeze the adjustment button to adjust
the backrest upwards.
!
Make sure the recline is set properly for use.
Adjust Calf Support
1 The calf support has 3 positions.
2 To raise the calf support, push it upwards.
3 To lower the calf support, press in both
(25)-1
buttons
calf support downward.
4 When the seat is fully reclined flat adjust
the calf support to vertical, pull out the
containment flaps and attach them to the
side of the seat base using the snaps
located on the containment flaps.
23
on the sides and rotate the
(25)-2
(26)
24
(24)-1
(24)-2
2
25
26
2
1
and pull
1
13